Jump to content

dennis101279

Bulldog
 View Profile  See their activity

  • Posts

    52

  • Joined

  • Last visited

 Content Type 

Everything posted by dennis101279

  1. dennis101279
    My main cab ground is on the left side just behind the cab pin on the frame. After looking in my dash they all run to a ground on the steering collum that runs to that ground. It all works good as new now.
  2. dennis101279
    Got her fixed. I was the cab ground. I found a wire that goes to the tranny for the back up light and was broke. Now all the lights work. Now to fix the radio. lol.
  3. dennis101279
    Thanks for the help. Mine has 2 wires on the frame there in the front another behinnd the fuel tand and the one on the rear. I am going to redo the grounds on the front today and open the dash to see what i find. This is just driving me nuts that i can figure out simple lights and a radio.
  4. dennis101279
    Name: Cabover MH613 Date Added: Owner: dennis101279 dennis101279
  5. dennis101279
    Well I got every thing to work as long as the marker / headlights are off. If I turn them on they come on bright as if the brakes are on. I started released the brakes put it gear and nothing. Only bright red brake lights. Now I noticed my radio is going on and off if the truck is running. I hate wiring. I am sure its something simple. Just finding it sucks.
  6. dennis101279
    Mine doesn't have it on the panel but yea that would help. Plus my radio now keeps going on and off. I think I have a ground issue some place but every thing else is fine.
  7. dennis101279
    Ok so I have been messing with this again. I wired them like I thought and the blinkers work but the 4 ways are dim. I turn the marker lights on and they are bright like the brakes are on and have no turn signals. I release the parking brakes and the same thing. I am stumped.
  8. dennis101279
    That's what I thought. I was sitting here thinking. I wonder if my brake light switch is stuck. That would explain why they are so bright.
  9. dennis101279
    You think this would be simple as that but I have either a turn signal or a bright brake light. Cant get it all to work. I have to be over looking something. The red white and black are hot. Red and white are the turn signals.
  10. dennis101279
    I have a 93 MH 613 and I need to wire up the rear 2 tail lights and the back up light. I have 2 red 4 inch round and one clear 4 inch round. I have 4 wires back there, a red white black and green wires back there. I can't seen to figure them out.
  11. dennis101279
    She is a 93 built in march of 93 bought new by Karpers. 660k on her 50k on in frame E7 350 v mac electronic with dynatard 3:90 eaton rears 9 sp eaton on reyco.
  12. dennis101279
    Can any one point me in the direction of a sun visor, upper middel or whole grill, driver side stack brace, and right side 95 gal fuel tank? Thanks.
  13. dennis101279
    My one friend told me i should paint it Conrail blue. I also am a train nut and love Conrail, but i have to say no.
  14. dennis101279
    Going to get better ones tomorrow. Going to work on getting the lettering off and buffing it to she how she looks. Got to do some wiring work to the tail lights so work properly.
  15. dennis101279
    Got her home today and spent all day cleaning the old girl. I know I said I would post some pictures but my batteries were dead. I will get some for you tomorrow. Plus I got handed the build sheets for her to. This truck just keeps getting better.
  16. dennis101279
    That is her. I brought her home today. The only guy who would drive it was called "Doc". He is retiring in 2 days so they put it up for sale. Runs great. Very clean inside, solid truck. 50k on inframe.
  17. dennis101279
    Picking her up at 8 am in the morning. I will post some pics tomorrow when i get her home.
  18. dennis101279
    Where can i get a Lund visor?
  19. dennis101279
    I was just in Canton2 weeks ago looking at a k100 to buy. My friend Josh lives there. We use to team together when we started out trucking for Covenant.
  20. dennis101279
    I like that square one. For the grill all i need is the upper middle.
  21. dennis101279
    I am in DuBois PA. I know where there is a grill if the guy will sell it. I still need check with the local mack dealer to see if they have anything. Sometimes you get lucky and dealers still have some old stock. Worth a try but I doubt it.
  22. dennis101279
    yarnall the bumper is junk. That's the only thing wrong with it. And don't worry BC Mack, no big drop visor for me. I want a factory one if I can find one and the brackets. If not I guess I will have to have one made from stainless. My local mack dealer has 2 complete cabs sitting in the weeds but will not part with a thing from them. There is another one in town sitting under a bridge rotting in the weeds. Stripped of everything I need. I plan on doing all the dash panels in wood but don't know what kind yet. I also need a grill. The top 3 bars are broke and have been glued together. Cant tell until you are up close but I just want to change it.
  23. dennis101279
    Thank every body. Didn't know that was the last year and there was only 122 made. Guess I got a bit of a rare dog.
  24. dennis101279
    The only one I have is my profile one. I took it with my phone. I will post more this week when I get her home.
  25. dennis101279
    Well I am going take the leap and buy my first truck. A 1993 MH 613. E7 350 9 sp rayco on the rear air ride cab eaton 40k rears 3:90. 660k on her 50k on in frame. Good rubber. Interior is perfect. Not one hole drilled in the dash. Cab is perfect. Now the fun starts when she gets delivered this week. New paint on the frame and cab. New square bumper and quarter fenders. Need to find a sun visor and brackets and driver side stack brace so I can put duel straights on her. Then maybe next year stretch her out 3 more feet and put freightliner air ride on the rears.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...