chico26

Just replaced high side line and compressor. Psi on high side is reaching 450psi low side is reaching 89psi. Any suggestions?

Sent from my iPhone using Tapatalk

Yea checked all fuses replaced the relay. Maybe the switch decided to go out.

Sent from my iPhone using Tapatalk

Ok we'll the truck started doing the same thing so I replaces the engine harness and it's working now. But when I was checking the harness I disconnected it with the engine running. The truck shut off naturally but now the I can't start it with the ignition I have to jump the solenoid. Any ideas?

Sent from my iPhone using Tapatalk

No codes. I found the problem. The main harness had about 4spots that were rubbed and exposed. Repaired the wires and truck is running

Sent from my iPhone using Tapatalk

My truck lost power won't go over 1200 rpm. No codes no smoke. Changed crank and cam sensor no change. When it hits 1200rpm it will start to sputter a bit. Any ideas?

Sent from my iPhone using Tapatalk