Jump to content

chico26

Puppy Poster
  • Posts

    5
  • Joined

  • Last visited

chico26's Achievements

Rookie

Rookie (2/14)

  • First Post
  • Conversation Starter
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. Just replaced high side line and compressor. Psi on high side is reaching 450psi low side is reaching 89psi. Any suggestions? Sent from my iPhone using Tapatalk
  2. Yea checked all fuses replaced the relay. Maybe the switch decided to go out. Sent from my iPhone using Tapatalk
  3. Ok we'll the truck started doing the same thing so I replaces the engine harness and it's working now. But when I was checking the harness I disconnected it with the engine running. The truck shut off naturally but now the I can't start it with the ignition I have to jump the solenoid. Any ideas? Sent from my iPhone using Tapatalk
  4. No codes. I found the problem. The main harness had about 4spots that were rubbed and exposed. Repaired the wires and truck is running Sent from my iPhone using Tapatalk
  5. My truck lost power won't go over 1200 rpm. No codes no smoke. Changed crank and cam sensor no change. When it hits 1200rpm it will start to sputter a bit. Any ideas? Sent from my iPhone using Tapatalk
×
×
  • Create New...