Burb

i would hope so but there is a distribution block of some sort when you take off the top cover of the dash where all the relays are and has a spot for ground and power but i dont know if its a dimmable power because i would like them to dim at night and by looking online needs 2 grounds and one power might have to buy a big 12v from a flashlight and use some wire and test the switches

hello everyone iam wondering if anyone knows the pin layout for the new style switces mack uses which lites up, dims, and has a seperate light for activated or in use on the bottom iam trying to get my 2 switches the company put in to be same as factory makes easier when we pave at night and where can I pull switchable and dimmable power from so it turns on and off with my maker lights thankyou.

hey everyone I drive a 2010 Mack CHU tractor and when the mechanics put in the switches for the tarp and the door for my flowboy trailer they did not make them illuminated which is a real ball buster at night and also the switch for the door is a mack switch blue LED and would like for it to be lighted also and when the door is open that the switch indicator light on the rocker be lit when activated does anyone have any suggestions on how to do this its a 8 or 6 prong switch

i know speedy will work but i dont know if bio ack will damage the clear coat which breaks down the liquid in the asphalt.

Hello everyone i currently have a mack CH with durabright wheels and the previous driver got asphalt all on them i work for a paving company and would like to know does anyone know anything i can use to get the asphalt off the wheels without damaging the clear coat i know speedy and diesel fuel will work but is there anything else?

hello everyone i have a 2010 mack chu613 and i need to run the coax on the passenger side because i have the splitter box that volvo uses in my truck so iam wondering if anyone has successfully done this in a mack through the mirror arm tube and does anyone know how to remove the inner door panel also any help would be appreciated also there is no coax on the passenger side for me to pull through to follow the path