Jump to content

chuckholes

Puppy Poster
 View Profile  See their activity

  • Posts

    41

  • Joined

  • Last visited

 Content Type 

Everything posted by chuckholes

  1. chuckholes
    There was a plug on the side of the pump that was removed with a 12 mm socket. Sprayed pb blaster up into the rack. The back of the pump has an access cover I took off and was able and sprayed pb plaster in and work a rod back and forth. the main fix seemed to be taking another cover off the front of the pump. There was a rod in there I sprayed with pb and then took a screw driver and pushed the rod back. It made a clicking sound. The fuel shut off starting moving fully. ‘Started it up and it began to idle well and the shutoff worked.
  2. chuckholes
    The back of the block is stamped E6-315-0115312. I would post a pic but don’t have room for more attachments and can’t delete any
  3. chuckholes
    I year later update. Over the past week or so I got it running. The injection pump fuel rack was stuck but finally got that moving. Runs pretty good. its E6 315 2v with 5 speed Mack .
  4. chuckholes
    I was able to get it unstuck. Runs pretty good
  5. chuckholes
    I have a f700 with a E6 315 2 valve engine. The fuel rack seems to be stuck wide open. The fuel cut off does not work its a bosh pump 9-400-231-051. Also part number 6p036 among others. The fuel rack does not have an access plate. There is a cover on the rear and top of the governor but neither gives much access to the internals. Any ideas how to free this thing up? suggestions on shops that could rebuild it? thank you
  6. chuckholes
    81 F and 67 MB
  7. chuckholes
    I have several military trucks running 20 inch. Very aware of the cost and difficulty. I’m looking for two 22.5 daytons for my Mack f712
  8. chuckholes
    How can you tell? Is there a data plate on the engine anywhere? Is the 300 cool power considered a Maxindyne? thanks for the info.
  9. chuckholes
  10. chuckholes
    Here is a picture
  11. chuckholes
    The cab is fairly decent. Are you familiar with the truck?
  12. chuckholes
    Odd thing is it currently has 4 22.5 inch wheels and 2 20 inch wheels . One side or the rear duals is mismatched. Front has one 22.5 and one 20
  13. chuckholes
    Believe it’s a Mack motor with a 5speed.
  14. chuckholes
    I’m in Warner Robins Ga. Found the truck in Bullock County Ga
  15. chuckholes
    Had been sitting 24 years in one spot. Ran when parked lol Any pointers on trying to start it? It’s a 1981. Are they 24 volt negative ground?
  16. chuckholes
    Definitely a two stick in my MB.
  17. chuckholes
    It’s a two stick. Assuming that’s a duplex.
  18. chuckholes
  19. chuckholes
    This is what I found. Was getting dark. This what I think it says D 722 6B 8852 11 KBA5850 P 2
  20. chuckholes
    Thanks will look there tomorrow
  21. chuckholes
    It’s duplex I believe. With 2 sticks
  22. chuckholes
    I looked on the left side of the trans. Cleaned with a wire brush and brake cleaner and still could not find anything in this area
  23. chuckholes
    Do you have a wider angle to give a better idea of where this is?
  24. chuckholes
    How can I determine what trans is in my 1970 MB? It is a twin stick. I searched the site and found some info about the type being on the left side. Nothing that I can find there. the right side has some casting numbers and the date 1/7/70 284KB 5122A. On the side.
  25. chuckholes
    That is the plan. She will be an Overnite for sure. Love the big O

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...