Jump to content
  • entry
  • comments
  • views

E7 350 Engine Won't Start on Mack CH613 after Repair from a Major Accident



One of my Dump Trucks was involved in a major frontal collision. The front bumper, Hood, Rad, and Driver Side steering arm were damaged. Otherwise, no other visible or mechanical damage was observed. The Mechanic believes all mechanicals have been repaired but the engine would not start. We have two different electricians have a go at it and nothing has been found. One thing that was noted is that there is no current to the Injectors (Electronic Unit Pumps - EUP). The engine is an E7 350 with Electronic Injection. Current view is that the problem is electrical in nature. I would appreciate any advise from this forum on hour to diagnose this problem further. Thanks a lot.


Recommended Comments

There are no comments to display.

Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...