Jump to content

Recommended Posts

I am starting to lose my mind here with one of our 1993 RD688S dump trucks.

Driver says, when the 'Electronic Malfunction' light doesn't come on, it won't start and it would occassionally shut down while driving, requiring the ignition to be cycled to restart. A couple of months ago I went through everything I could think of, only replicating the issue one time, but otherwise finding nothing wrong. Then it only happened a couple times over the next two months. Yesterday the truck got stranded on the side of the road for an hour before it would finally restart, and once again, I can't replicate the issue here at the shop.

The best I can figure is its a ground some where, common to the lamp, but by the limited schematic I have that seems to be coming from the VCM. If anyone has any insight or a better wiring diagram I would really appreciate some help.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...