This is just a theoretical question that has come up for a work competition i am busy with and i just cant find enough information on it.
Maybe i just don't have the correct access or maybe I'm just looking in the wrong places.
The driver of a Mack CHU activated the hazard flashers after stopping at a job site. When the flashers were turned on, the dashboard displayed an ABS fault. However, once the driver turned off the flashers and continued driving, the light disappeared. What is the most probable cause of the ABS light.
AFaulty ABS Tone Wheel
BA wiring fault on Pin 10 of S212 (Hill assist switch)
Question
REDJOHN
This is just a theoretical question that has come up for a work competition i am busy with and i just cant find enough information on it.
Maybe i just don't have the correct access or maybe I'm just looking in the wrong places.
The driver of a Mack CHU activated the hazard flashers after stopping at a job site. When the flashers were turned on, the dashboard displayed an ABS fault. However, once the driver turned off the flashers and continued driving, the light disappeared. What is the most probable cause of the ABS light.
Link to comment
https://www.bigmacktrucks.com/topic/75740-this-is-a-theoretical-question-about-a-mack-chuconcerning-abs-and-flashers/Share on other sites
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.