Jump to content

2011 pinnacle a/c question


Recommended Posts

i have a 2011 pinnacle day cab that has no a/c. upon inspection i found no power getting to the binary switch. when i check the fuse i find only .025 volts getting to the fuse. when i unplug the harness from the a/c control panel i get 12 volts coming out of the control panel but as soon as i plug the harness back in it drops back down to .025 volts. i put a new control switch in thinking that the problem was in that and it did the same thing. so i plugged the old control panel into a different pinnacle and it works fine. i cant find an apads on this unit. my question is this. what if anything is in line between the control panel and the fuse that would cause such a large drop off in voltage when i plug the control panel in? and if there is nothing what would be causing this large drop off?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...