2manytrucks

spicer 5831B complete with mounts,shifter & linkage $1500. spicer 7041 with shifter $1200 315 269-0181

have one in central,ny. complete with mounts,shifter,linkage,etc. 315 269-0181 call/text

I have a set of 7.49's in central,ny

run a bead of weld down them, that will shrink them. works great on bushings too

thanks, but do you know for sure they are the copies that Watts sells and not genuine Lund? I have had several Lund visors, never had any problems with fit/finish/etc. I just want to make sure the copies look/fit like an original Lund

as the title says. I'd like to see one on a truck before I buy one. comments also welcome. thanks

no, we go to an engine & tractor show that weekend, and that's only 45 miles from home.

hello, Im interested in your mack rears. (315) 269-0181 thanks, steve

heres the two that I took to Liverpool. 86 marmon 57P, 74 KW K100

will it fit? is it a direct bolt in? they are both 44's and double frame trucks. dummy didnt have a tape measure with him......thanks.

old trojan 254 we used to have.

BENDIX WESTINGHOUSE

nothing wrong with that detroit... my cousin bought it, I hauled it home. the emergency shut down was tripped. reset it, and it runs like a top.

74 kw and 61 mack

have you tried running it up on jack stands? very carefully, of course. at least then maybe you could figure out if it was front or rear.

the local rag never has anything good, but one day I spotted this.

just got my first mack a few months ago, 1961 B61,thermodyne,quadbox, factory p/s, with 7.49 gears. it used to be a tar truck with penn-can road materials, so the rears are coated with 2inches of tar, but the truck is in excellent shape. the plan is to make it a single axle, possibly with air ride.