Bubica
-
Posts
8 -
Joined
-
Last visited
Bubica's Achievements
-
Thank you very much you have helped me out 2 times now. I'm sure I'll be asking more question and thank you in advance because I'm sure I'll be posting more questions till everyone gets to know me. Hahaha
-
Hi I'm wanting to put a boost gauge on my ami370 but don't know what gauge to get since I don't know how much boost it makes stock? Does anyone know? Thank you in advance.
-
I'm in north Georgia just about 1 hour north of Atlanta. I'm gonna drain it today and replace it with a 46w hydraulic oil.
-
I'm glad I asked. I did get a smell of trany fluid how bad would it be to just add a iso 46 w? I have plenty of that on hand
-
Thank you I'm gonna try and reach it with the bed all the way down if I can't get to it I'm gonna raise it just enough to to able to engage the safty arm. What typ of fluid do I need to add? I have seem people adding transmission fluid but don't know if that's correct?
-
Thank you sir. I definitely tried to clean the tank in hope there was a window like my other equipment has but I didn't see one or a dip stick at the end of the cap. Then I thought there has to be a way to position the bed and then just fill to the near top but I didn't wanna overfill the tank and cause a problem.
-
Thank you for your reply. I do believe it has chatter when going up it feels like it's bumping it up inch by inch instead of a smooth steady push. About how much fluid should be in the tank when the bed is all the way up? 1/2 tank 3/4? Thank you.
-
Hey everyone. I'm new to this dump truck and dump trucks in general. I was wondering how to properly check the fluid levels in my hydraulic resivor that sits on top of the frame between the cab and the lift cylinder. There is no dip stick or window on the tank. Any help is appreciated. I also apologize if this is the wrong thread I'm posting on I'm new on this forum.
BMT Forum Logo
