Jump to content

Jeffrey 34

Puppy Poster
 View Profile  See their activity

  • Posts

    40

  • Joined

  • Last visited

 Content Type 

Everything posted by Jeffrey 34

  1. Jeffrey 34
    Joey Mack the wires look good I guess I’ll get the celenoid for it,that might be why it’s so sluggish and no boost when I’m taking off loaded.
  2. Jeffrey 34
    Joey Mack,yes line is clear , don’t want to have to buy that celenoid but I don’t see what else it could be I mean that’s what controls the turbo actuator
  3. Jeffrey 34
    Joey Mack no air at all until you crank the engine then you have plenty coming out,don’t know if I need to try and mess with that celenoid filter or not that’s a hunk of gold,the truck runs fine just has no boost when you starting from a dead stop.
  4. Jeffrey 34
    Joey Mack I’ve taken little filter off and has good air coming out and check all lines going to it ,that celenoid with filter that the small line runs to can you clean it out or not
  5. Jeffrey 34
    Yeah mine is not cycling when you turn key on with good air pressure,there is no air coming out of air line to actuator until you crank engine
  6. Jeffrey 34
    Hello,does the turbo actuator on a 2006 Mack aset supposed to cycle when you turn the key to on position or does it have to have a certain amount of air pressure to cycle,mine is not moving when I turn the key on.
  7. Jeffrey 34
    I have a 2006 Mack vision with the 355/380 aset engine,just wondering if I replace the turbo and injectors with the 427/460 ,would my ecu have to be reprogrammed or would it work like it is ,just trying to get a little more hp.
  8. Jeffrey 34
    2006 Mack vision with aset engine ,have a 2-8 code cegr sensor ,are those the two sensors in the crossover tube and do you replace them as one unit since they tie together in the back of em or do you splice the wire.
  9. Jeffrey 34
    Oil pressure gets down to 18 at idle and around 38 at 60 mph but once you get it rolling it makes good boost
  10. Jeffrey 34
    I have a 2006 Mack vision with the 355/380 aset ,when I take off from dead stop it makes no boost and real sluggish until you get rolling good then it’s starts making around 28 boost and runs fine ,truck has 1.5 million miles on engine could low oil pressure cause no boost .
  11. Jeffrey 34
    Going to replace coolant sensor and see if that helps ,when fan kicks on the lightning bolt comes on and codes for fan clutch blinks ,fan is not 3 months old.
  12. Jeffrey 34
    Going to replace coolant sensor and see if that helps ,when fan kicks on the lightning bolt comes on and codes for fan clutch blinks ,fan is not 3 months old.
  13. Jeffrey 34
    Ac on or off does the same thing
  14. Jeffrey 34
    I’m having problems with engine fan on this 2006 Mack vision ,when pulling a load and temp gets close 200 the fan kicks on and the temp goes down to 150 and the fan never cuts off until I stop and switch truck off and start again,it’s like a sensor or something not sending signal to cut fan off ,any suggestions would be appreciated.
  15. Jeffrey 34

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...