delriomack

Looking for a good source of parts for a 1966 Mack C-95 pumper (open cab). Specifically looking for a rebuilt carb. for Mack ENF707C gas engine (as well as other possible engine parts). Also looking for new steering wheel before the current one comes off in my hands.

As always, I greatly appreciate the help I receive from this group. I am a novice (non-mechanical person) and your assistance is invaluable.

Many thanks,

Gary M. Belt

Manassas, VA

I have a complete 64 Mack C95 carb that looks complete.

It is not rebuilt but would be a good parts source or used

as is, with an overhaul. Give me a call if this is up you're ally.

Dave Casey

830 775-0045

I HAVE THE 4 FLUSH MOUNT EQUIPMENT BAY LATCHES

OFF A 62 MACK C95. I ALSO HAVE TWO SMALL

GRAB HANDLES OFF THE ENGIN HOOD.

THE SIDE GRAB HANDLES ARE STOCK MACK

COMPONENTS WITH CHROME PIPE SECTIONS

CUT TO LENGTH. I WILL GET YOU THE VENDOR

OF THE CHROME PIPE (BETTER THAN ORIGINAL)

AND CHEAP ON TOP OF THAT.

I TOOK MY PIPE , WITH A SAMPEL TO MY

ELECTRICAL CONTRACTOR AND THEY

PUT THE BENDS IT FOR UP THE BACK. SLICK!

DAVE CASEY

maxbrother@aol.com

Del Rio,Texas

Looking for a source to purchase grab handles, railings and recessed latches for compartment doors on a 1966 Mack C-95 open cab pumper. The existing handles, etc., are chrome and in a rusted/pitted state. I know I can likely have these parts re-chromed, but it may be cheaper to look for new items.

Regards,

Gary M. Belt

Manassas, VA

Chief C , I don't believe that 1962 Mack is a CF, it most likely is a C. Mack started making CF's in 1968-69.

Ray , Ex Chief Fair Haven FD, NJ

Thanks,

I checked the Build Plate and I guess you are right.

It is C 95 F 1131

Dave Casey

maxbrother@aol.com

Looking for a used or new front trim panel for a Mack CF Fire Engine. This would be the front panel that covers from the top molding to below the top of the bumper. Any help would be greatly appreciated. Thanks.

I am just removing that verey panel, head lights and all with small red lights in tact.

It's coming off of a 1962 Mack CF.

I have and will not use (up for grabs) the complete pump panel, windshield

and all other glass,doors, hose tray(2 of em) head gaskets etc,etc. Also the Hale 750

pump needs a home bad.

I am restoring a 1953 Mack pumper and this is my sorce truck for parts.

I am in Del Rio Texas near the end of the earth but your part is relivtivy light

so shipping should"t be too bad. Let me know if I can be of any help.

Love those Macks.

Dave Casey

maxbrother@aol.com