delriomack
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by delriomack
-
-
I HAVE THE 4 FLUSH MOUNT EQUIPMENT BAY LATCHES
OFF A 62 MACK C95. I ALSO HAVE TWO SMALL
GRAB HANDLES OFF THE ENGIN HOOD.
THE SIDE GRAB HANDLES ARE STOCK MACK
COMPONENTS WITH CHROME PIPE SECTIONS
CUT TO LENGTH. I WILL GET YOU THE VENDOR
OF THE CHROME PIPE (BETTER THAN ORIGINAL)
AND CHEAP ON TOP OF THAT.
I TOOK MY PIPE , WITH A SAMPEL TO MY
ELECTRICAL CONTRACTOR AND THEY
PUT THE BENDS IT FOR UP THE BACK. SLICK!
DAVE CASEY
maxbrother@aol.com
Del Rio,Texas
-
Looking for a source to purchase grab handles, railings and recessed latches for compartment doors on a 1966 Mack C-95 open cab pumper. The existing handles, etc., are chrome and in a rusted/pitted state. I know I can likely have these parts re-chromed, but it may be cheaper to look for new items.
Regards,
Gary M. Belt
Manassas, VA
-
Chief C , I don't believe that 1962 Mack is a CF, it most likely is a C. Mack started making CF's in 1968-69.
Ray , Ex Chief Fair Haven FD, NJ
Thanks,
I checked the Build Plate and I guess you are right.
It is C 95 F 1131
Dave Casey
maxbrother@aol.com
-
Looking for a used or new front trim panel for a Mack CF Fire Engine. This would be the front panel that covers from the top molding to below the top of the bumper. Any help would be greatly appreciated. Thanks.
I am just removing that verey panel, head lights and all with small red lights in tact.
It's coming off of a 1962 Mack CF.
I have and will not use (up for grabs) the complete pump panel, windshield
and all other glass,doors, hose tray(2 of em) head gaskets etc,etc. Also the Hale 750
pump needs a home bad.
I am restoring a 1953 Mack pumper and this is my sorce truck for parts.
I am in Del Rio Texas near the end of the earth but your part is relivtivy light
so shipping should"t be too bad. Let me know if I can be of any help.
Love those Macks.
Dave Casey
maxbrother@aol.com
1966 Mack C-95 Parts Needed
in Fire Apparatus
Posted
I have a complete 64 Mack C95 carb that looks complete.
It is not rebuilt but would be a good parts source or used
as is, with an overhaul. Give me a call if this is up you're ally.
Dave Casey
830 775-0045