chad4142
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by chad4142
-
-
sorry working on a 98 e7 400 eup engine according to mack..
What about a place to locate a book or pdf on computer to get specs for putting cam back in and adjusting the valves clearance ?
-
On 12/28/2012 at 11:26 PM, turckster said:
The only way to replace a lifter on an etech engine is to remove the camshaft. The lifters will have to be supported by magnetic tipped rods slightly longer than the pushtubes. There is a special tool that clips onto the rear of the cam to aid in removal. The cam weighs about 90 lbs with the gear.
Are you replacing the lifter due to damage? Better take a good look at the cam lobe, it could be damaged as well.
do you know the name of the magnetic rods to support lifters, also the name of the tool that clips on to the rear of the cam ?
-
On 12/28/2012 at 11:26 PM, turckster said:
The only way to replace a lifter on an etech engine is to remove the camshaft. The lifters will have to be supported by magnetic tipped rods slightly longer than the pushtubes. There is a special tool that clips onto the rear of the cam to aid in removal. The cam weighs about 90 lbs with the gear.
Are you replacing the lifter due to damage? Better take a good look at the cam lobe, it could be damaged as well.
Lifter replacement
in Engine and Transmission
Posted
any chance you could call me and help me find that manual ?