-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by YASER
-
-
I think I have 95 ch 613, EM7 300, although I think they are the same.
-
You have already fixed it, but try to disconnect the oil pressure sensor that is above the oil filter, it may be defective, make a bad reading and turn off.
-
Hello, I wanted to know if you found a solution to the problem, I have an E7 350 and the same thing happens, little force in the output when it is loaded, I put new turbo and continued the same. I would appreciate your help
-
Thank you very much for your help, I will try to try a pedal from another mack before buying a new one because it can not be returned. Do you think that the white smoke of the morning at the moment of the start is for the same reason?
-
Good to all the members of the forum. I need help, I have a mack E7 350, year 95, with bosch injection pump, the question is that the engine accelerates only up to 12-14 RPM and then goes back to normal work. Which or what would be the possible causes and the solution, thank you for your help, thank you
-
I had a similar problem in my two mack ch 1995 and 1998 turned out to be bad connection in the connector that comes out of the pump of injection for dirt, with a cleaner of connectors solve the problem.
- 1
Help wiht the calibration of the valves, thank you
in Modern Mack Truck General Discussion
Posted
Good morning, I wanted to ask you for help with the calibration of the valves on an E7 350 1995 engine, thank you very much for your help