Village farms

Thanks for the info

Thanks for the info

Is the dipstick for the 300 ESI with large oil pan same length?

Thanks I'll try to locate and use your advice.

Working on down my list on this ole truck. My wipers come up about halfway but that's it.

where are the controls for these wipers located and how to access them for repairs if needed

Thanks for the info!

My thoughts also after being cheap! 

On my list to change out gauge.

How many gallons/quarts of oil is the em6-300 supposed to hold?

Thanks fellas,  this quick fix is working so far.

I used an existing unused plastic line and ran it to a unused 150 psi gauge. 

I haven't driven it yet but it doesn't register on this gauge if I rev it.

Thanks.

I'm installing a boost gauge on my em6-300. 

Where is the best location to install the air line fitting on this engine for the boost gauge?

I found my puff limiter cylinder leaking on my American Bosch pump and have ordered a new one.

My truck had a bad oil leak and it seems to be coming from the housing the puff limiter screws in to. I can rotate the housing with my hand.

Is this normal? And if not, do I have to pull injection pump to repair/replace.

Any help appreciated.

1983 R model em6-300r

Thanks, I ordered the tags-442 and received it today. Not sure it covers my em6-300 though in my '83 Valueliner.

ill check with the Mack museum.

Thanks!

Hello,

I'm new to this forum and would like to know where I can find a service manual for my truck.

it has a EM6-300 engine

1983 Valueliner, 10 spd air splitter.