mcotter

Thanks for the information, We recently discovered that we can keep the light lit with the throttle pedal at one certain point. Driver was playing with it and made it happen several times so we are leaning towards a new electronic throttle pedal now as it does seem to have different levels of power with pedal in same area at times.

I have a 2002 CL713 with a Mack 460, the electronic malfunction light will flash on and off at times while driving but will not while setting still. I had it checked out for codes and came back with engine position sensor problem. I changed it but still have the light flashing on and off at times. when this happens, driver says he can hear a slight change in engine sound and slight loss of power when this happens. Other than that truck runs great. I'm not much of a electronic guru but just need to pointed in the right direction. any thoughts or answers on this problem is greatly appreciated.

My 2014 triumph rocket 3 touring 2300cc

My wifes 2011 yamaha raider 1900cc

Thanks, this looks like it will help.

I have a problem shifting into and out of 3rd low and 7th high, almost acts like it is sticky or dry and requires some effort at times to get in and out. Any thoughts are appreciated.

I'll post some better pics when I get it home

Thank you jhancock I will take a look when it get out of the single digits here, or my shop gets empty! Lol

In what area on the carrier do I look for ratio? And would weight for front and rear be stamped somewhere also?

Can anyone tell me what my axle weights and ratio is from this vin 2M2N187Y3JC025378, any help is appreciated.

Name: R688ST

Date Added:

Owner: mcotter

mcotter

Wow, you must live in a lawless state! No tarp, overloaded I wouldn't even think about getting close to the road with that load. D.O.T. here in Michigan are like fleas on a dog. Got pulled once for no tarp and it cost me two points on my license and upped my ins.

I would be like a kid in a candy factory!

I have three koehrings, two 405's and a 440 spanner

Will have to dig a little deeper on history. It all looks original to me.

That's what I was always led to believe but with all the miss match I thought I would give you guys some food for thought. It does have mack air suspension.

Thanks, haven't tried hcea on Facebook and I'm a member.

Not yet, haven't gotten it home as dealer is putting on PTO and pump. Motor is mack trans is Eaton fuller and rears are poss rockwell. They are checking on that.

Just bought a 2002 cl713 has gold dog on hood and on the side of the hood it has elite CL in gold poss other areas with gold Plating. Is this something special?

Thanks for the information.

Any dragline folks out there? Just looking for new parts resources for my draglines. I have two 405's and a 440 spanner that we work daily. Would like to have more than one vendor to check for parts with. New or used. You can also see my draglines on Facebook or YouTube under cotter dragline. Thanks

Thanks for the info guys, 1100rpm's should be more than enough to run my trailer up and down.

Just bought a 2002 CL713 with an E7 460 and was just wondering how to bump the rpm's up to run hyd pump for the lowboy trailer without using your foot.