w3grant

I have a 2011 pinnacle. Truck will start up but the dash does not work no gauges work. When I went to shut it off would not shut off event when I removed key. To shut it down had to stall it out. Thanks in advance!

I have a 2011 cxu612 reverse lights go from very bright to very dim voltage goes from 12.5 to 3. Do these trucks have a module or a computer for the lights. All other lights stay bright and do not change. Thanks in advance!

I have a 1981 Mack I have the vin number. Was trying to find out what it has for an engine and axles. I have the vin if that helps 1M2N191C2BA001031 Thanks for your help.

Thanks to all that helped I found the sensor that was leaking oil.Truck is back up and running.

Ok I will check the sensor in the pan. Where aboust is the eop sensor located?

I have a 2008 Mack with an MP8 in it. Trucks starts up and runs fine then while driving down the road goes into limp mode and wont go above 20mph. A previous mechanic scaned it and said it needed the oil sensor inside the pan they did that and we still have the same problem. That is why I am now looking at it unfortunately I do not have a scan tool so I cant read the data. Any help would be awesome Thanks again!