-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by Tony.P
-
-
Hello Guy's
Reference: 2004 CXN-613 / AC 380-410 Series Engine / Coolant Pressure Issue
This engine had a original Coolant Leak at the Thermostat Housing connection to the engine.
Once the thermostats was replaced, is seemed fine @ idle, but after a run on the Highway
it pushed the bigger upper radiator hose forward off the thermostat housing neck and a leak developed.
Thinking that the Hose clamp was not tight enough, reset hose on thermostat housing,
re-tightened all hose connections and had the driver take it out again on a run.
This time it blew out the Y-Hose @ the EGR Cooler, after about 13 hours of running,
reinspected the Top hose, it also slid forward on the neck from it's original position
but did not come off or leak this time.
After reading some other posts here on this site, i'm leaning toward a cracked EGR Cooler
building up pressure in the system.
Looking for some additional feedback and diagnostic tips to help solve this issue
Thanks in Advance for your Help
Tony.P
Fault Code: SID 277 FMI:5
in Engine and Transmission
Posted
Hello Guy's
2006 Mack CXN-613 / Asset A/C Engine
Looking for diagnostic troubleshooting information for fault code Sid:277 FMI: 5
Thanks in Advance for your help
Tony P.