stockf7

Dont know much about it maybe you guys can help

Looking good. I'm kinda a round headlight kinda person myself, but nothing against the work you're doing.

Now that I see the 2 trucks together I also like the round lights but... that the ones I’m putting in are a bit different we will see

Did you do the fiberglass repair or send it out? I am needing to fix a crack and don't know anything about it. A neighbor said it would only be a $100 or so to fix a body shop, have not checked yet.

I fiber glassed the hood myself its easy, make sure your back side is clean I use a die grinder with a carbide burr to rough it up. Get some resin, hardener and fiberglass matting. I would put about 2-3 layers over the crack on the back side first making sure you are 3-4 inches over the crack. On the top side feather it out (make sure you are in to the new fiberglass) so u can stack the matting in layers until you are just over flush with the good part of the hood. Sand the fiberglass may have to add a bit of Bondo, sand then paint.

Putting dual square head lights from a Kenworth in the truck

Great work. What did you use to get the paint off ?

Just used 40 grit sandpaper with orbital sander and set in on grind until got close and switched to 80 grit to take it to down the fiberglass

Looks like it is coming along. Probably a little cold to use the paint booth right now.

Ya today is nice only -13 C

Like your paint booth!

LOL

Would be surprised how well it turned out, there is a small gap under the sea can so there was just a nice draft to carry the over spray out the door.

And this is my shop, storage place everything until I can start my shop in the spring.

I have an ENDT 675 and looking for overhaul kit, mack wants 6K for long block parts

any info will help thanks

Working on my mack 675 the engine is removed from the truck what do you guys use for an engine stand

thanks

Hey guys

im looking for dust shields for my Mack R612ST number on the one part is 40391 and found Bendix# on line 77028 but can not seam to find any of them can you help me out where to look.

Mack could not help

thanks

Hello

Just purchased a 1983 Mack dump truck and I’m looking for a service manual. Just checking to see if anyone can help me out where to find one.

Thanks