Mack superdog Posted October 3, 2022 Share Posted October 3, 2022 I have a 98 Cl with an e9 backed by a Mack 2180 18 speed I’m swapping to an Eaton 18 will a Bell housing from an e7 that had an Eaton work or do I need one that came from an e9 that had an Eaton doesn’t the turbo pedestal bolt to it ? Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted October 3, 2022 Share Posted October 3, 2022 Are you talking about the flywheel housing or the trans bell housing?The flywheel housing will be same but the trans housing will not work from a mack trans to a eaton 1 Quote glenn akers Link to comment Share on other sites More sharing options...
fjh Posted October 3, 2022 Share Posted October 3, 2022 1 hour ago, theakerstwo said: Are you talking about the flywheel housing or the trans bell housing?The flywheel housing will be same but the trans housing will not work from a mack trans to a eaton Yup you need a mack/ eaton trans bellhousing mounts on the trans for E9 or any Mack engine any 18 speed fuller pulled from a Mack will fit behind an E9 you may have to alter the clutch cable mount and arm! ! Western star and Mack had similar ideas on engine mounts however Mack Mounts are better ! Way easier to remove than Star in most cases due to the clutch arm on the star!! 1 Quote Link to comment Share on other sites More sharing options...
Mack superdog Posted October 3, 2022 Author Share Posted October 3, 2022 My question is do I have to change the peice that the turbo and pedestal is bolted to Quote Link to comment Share on other sites More sharing options...
Popular Post Mark T Posted October 3, 2022 Popular Post Share Posted October 3, 2022 No 2 1 Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted October 4, 2022 Share Posted October 4, 2022 That pedestal bolts to the flywheel housing, not the bell housing. 2 Quote glenn akers Link to comment Share on other sites More sharing options...
Popular Post R.E.D Posted October 4, 2022 Popular Post Share Posted October 4, 2022 Try to get the steel Bell housing not the aluminum one...the torque from the e9 will probably end up ripping the insert rivets and the mount will fail.Had this happened to me with an e7. 3 1 Quote Link to comment Share on other sites More sharing options...
fjh Posted October 5, 2022 Share Posted October 5, 2022 8 hours ago, R.E.D said: Try to get the steel Bell housing not the aluminum one...the torque from the e9 will probably end up ripping the insert rivets and the mount will fail.Had this happened to me with an e7. Good Call RED! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.