Jump to content

End673 water pump seal and bearing


Recommended Posts

Anybody have part numbers for the replacement bearings and seal for the water pump. I think I have a bad pump so I want to rebuild it and rule it out.

I'm getting air entrained in the antifreeze that is not overflowing the filler neck at 2000rpm. No water in the pan or oil in the water. Antifreeze stays green when settled.

Thanks everyone! 

Link to comment
Share on other sites

sorry cant help you but i would talk to autozone,,,and have them send it out..unless of coarse you have a local established auto parts...here in reno thier all gone. no one has any choices but chain stores,or dealership...good luck...bob

Link to comment
Share on other sites

I've used these guys over a dozen times through the years with great service and turnaround times:  http://www.waterpumpkit.com/

Cost is usually just over a hundred but I've never had a problem with their work. I had sent one in for my 64 B-61 and the casting was bad. They had one charging me $10.00 for it.

I'm sending the water pump from my 57 Hobart Bros. welder to them later this week as it's taken to leaking from the weep hole.

  • Like 1

Dog.jpg.487f03da076af0150d2376dbd16843ed.jpgPlodding along with no job nor practical application for my existence, but still trying to fix what's broke.

 

 

Link to comment
Share on other sites

22 hours ago, mowerman said:

no one has any choices but chain stores,or dealership

Same here. 3 chain auto places literally within 100 yards of each other.

Link to comment
Share on other sites

If you could let me know your available part numbers for the B series as I've got a couple of later model install projects coming forward.

Thanks,

Rob

Dog.jpg.487f03da076af0150d2376dbd16843ed.jpgPlodding along with no job nor practical application for my existence, but still trying to fix what's broke.

 

 

Link to comment
Share on other sites

On 1/25/2021 at 6:07 AM, Frank Y said:

Same here. 3 chain auto places literally within 100 yards of each other.

We had a really huge one here independent he mad a really big machine shop as well all of a sudden they were gone... bob

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...