Hootinhanny Hauler 8 Posted December 24, 2020 Share Posted December 24, 2020 Looking for superliner RW 16,000lb OR 20,000lb front axle with spindles. Front cut off would be nice with steering boxes and leaf springs, hangers, if possible. Name your price. Quote Link to post Share on other sites
alex g 728 Posted December 24, 2020 Share Posted December 24, 2020 Hootinhanny I have a 20k front in a DM is it possible it would fit? 1 Quote Link to post Share on other sites
terry 537 Posted December 24, 2020 Share Posted December 24, 2020 if the spring width is the same then measure u bolt hole to u bolt hole from side to side , if they are the same on each truck, it should work. terry 1 Quote Link to post Share on other sites
Hootinhanny Hauler 8 Posted December 25, 2020 Author Share Posted December 25, 2020 Thanks guys. From what I gather, the Superliner 16k and 20k fronts have a 4” width leaf spring with a spread of 54”?(can’t remember actually distance). I just did a complete 20k swap into a 1986 super rw700 with 3406b. it was hard to find it. Looking for another, 14klb front takes a beating hauling heavy, 50 ton plus loads. I also read any MH model will have a front end that will work. Quote Link to post Share on other sites
880joe 42 Posted December 25, 2020 Share Posted December 25, 2020 I have a superliner that I parted out it has the 4 inch wide springs I don't know the rating on it though. It was a 700 series with an e9 but only had single steering box 1 Quote Link to post Share on other sites
Hootinhanny Hauler 8 Posted December 26, 2020 Author Share Posted December 26, 2020 6 hours ago, 880joe said: I have a superliner that I parted out it has the 4 inch wide springs I don't know the rating on it though. It was a 700 series with an e9 but only had single steering box Do you still have the axle? Could possibly be a 16k front with single steering box? Thanks Quote Link to post Share on other sites
880joe 42 Posted December 26, 2020 Share Posted December 26, 2020 Yes I do Quote Link to post Share on other sites
Hootinhanny Hauler 8 Posted December 27, 2020 Author Share Posted December 27, 2020 880joe can you send pics of axle with numbers on it? Should take 4” springs with spread of 34.5” inch. Quote Link to post Share on other sites
880joe 42 Posted December 27, 2020 Share Posted December 27, 2020 Can't seem to post anything on here but if you send me a email address or text number I will send you some Quote Link to post Share on other sites
Hootinhanny Hauler 8 Posted December 29, 2020 Author Share Posted December 29, 2020 On 12/26/2020 at 8:19 PM, 880joe said: Can't seem to post anything on here but if you send me a email address or text number I will send you some Natebelmonte@yahoo.com thanks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.