Jump to content

Mack Steel Dash DM600 & DM800


Recommended Posts

Not sure of the years but pre 1973 as they both have steel dashes. They both have 237 maxidyne engines. The blue DM600 has a 6 speed and the DM800 has what I believe to be a quadruplex. Both trucks ran very good when parked but have been sitting for several years. The DM600 has a jake brake but the DM800 does not. 6 is a triaxle and the 8 is a tandem with obviously very heavy rears. Probably 58,000 pounds or more. 12.00x24 rubber and Mack axles on camelback suspensions. Both trucks are pretty rotten and too far gone for any kind of restoration (in my opinion), however the engines, transmissions and drivelines are all good parts. They are essentially good complete parts trucks.  Looking to get scrap price or maybe a little better if possible. Just trying to save them from the torch if somebody can use them. Located in the Pittsburgh, PA area. Please do not ask if I will export these or deliver them to a port. I will not deal with exporters. Thank you.

IMG_2492.JPG

IMG_2491.JPG

IMG_2493.JPG

IMG_2494.JPG

IMG_2489.JPG

IMG_2490.JPG

  • Like 2
Link to post
Share on other sites

Yes I agree. The cabs are rough as well too. Very poor floors. I see the value in the engines, and drivelines as they both ran like sewing machines when they were finally parked. Its just a shame to see them get scrapped considering they are good running engines, transmissions, and rear ends.

Link to post
Share on other sites
  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...