Popular Post teched 33 Posted December 10, 2020 Popular Post Share Posted December 10, 2020 Got the heads/blower/AC back on...well almost. The blower needs the govenor fork "finangled" on the shaft. Still have to pull the en401 out and see if I can bolt the duplex to the Detroit Bell housing. Worse case I guess ill run the 5speed Fuller since it has the flywheel, clutch, etc. Cold weather has arrived in Northern NY and I needed to pull it out my work bay. I have her all covered up outside. I pulled the nose off and have started body work. Also removed the "Rust" formally known as Floor pan. Slow and steady wins the race! 5 Quote Link to post Share on other sites
mowerman 2,241 Posted December 10, 2020 Share Posted December 10, 2020 Excellent man have a ball.... and 10-4 on the slow process,,,, most of us have the same problem.... every thing around my place always seems to come first... bob Quote Link to post Share on other sites
teched 33 Posted December 10, 2020 Author Share Posted December 10, 2020 Its hard when you have a day job and family, not too much time for "projects" 1 Quote Link to post Share on other sites
mowerman 2,241 Posted December 13, 2020 Share Posted December 13, 2020 Yes just my full time job alone,,, beats the piss out of me Not counting everything else I got going on...: bob Quote Link to post Share on other sites
mattb73lt 983 Posted December 13, 2020 Share Posted December 13, 2020 A little bit at a time, just keep moving forward!! It’ll get done. Quote Link to post Share on other sites
teched 33 Posted December 14, 2020 Author Share Posted December 14, 2020 (edited) This weekend project. The fenders are going to be black so I'm trying to get them straight and use not 5 gallons of bondo. Edited December 14, 2020 by teched Spelling 1 Quote Link to post Share on other sites
mowerman 2,241 Posted December 14, 2020 Share Posted December 14, 2020 Right on man lots of hammer and Dolly I don’t really like to use a lot of it either they look good so far... bob Quote Link to post Share on other sites
mrsmackpaul 2,553 Posted December 14, 2020 Share Posted December 14, 2020 Good luck with that, bondo or bog as we call it out here is cheap so 5 gallons will be a good Chrissy present😆😆 Paul Quote Link to post Share on other sites
teched 33 Posted December 15, 2020 Author Share Posted December 15, 2020 Bondi is about $20 a gallon at Wal-Mart and $30 at Advanced Auto parts. I have found it for $15 on sale a couple of times. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.