Jump to content
OJ Avery

ABS/Speedo??

Recommended Posts

I have a 08 gu713 dump. MP7 engine, Mack 10 speed trans. The speedo stops working after 5mph. Then once you're over 5mph the rpms are limited to 1500. The speedo sensor at the trans is new. I have an active code for an abs sensor (left axle 2). Will that active code mess with the speedo?? 

Share this post


Link to post
Share on other sites

Thanks for the input....lol. So it had an active code for the lr axle, and an inactive code for right rear.  So i ohmed the lr...open...ohmed right rear ...open.So I replaced left rear, cleared codes. right rear popped up as active. drove it, works good. Now I'm replacing the right rear. Turns out the vecu freaks when it sees no wheel rear speed at all but front only. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...