Jump to content

Recommended Posts

Any recommendations for a company that restores fuel tanks.  Mine is rusty on the inside and needs redone.  Thanks in advance.

Share this post


Link to post
Share on other sites

put crushed rock in side strap it to a wheel let it spin farm tractor slow ?

  • Like 1

Share this post


Link to post
Share on other sites

A lot of radiator shops also do fuel tanks.  I use Marko Radiator in Shenandoah Pa.  not close to you though. Mike. 

Share this post


Link to post
Share on other sites

A good Radiator shop can clean it out .   Paul

Share this post


Link to post
Share on other sites

I like the idea to fill with rock and strap to a tractor wheel or a portable cncrete mixer barrel. To the moment I have done 4 steel truck tanks and the most thing I figured out of that the job is difficult and expensive. If you don't worry about the look of the weld seams or they allow by style reskin it with new sheet metal. I did two of them such way. Another (the 1st) pair was rocked and rolled what took alot of efforts including welding the holes which took their place after cleaning the rust and the result didn't seem perfect. So no I would go another path cutting a big hole in the back side and sandblasting the inside through. Than welding it back after.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...