Jump to content

Recommended Posts

Looks great. Perfect amount of patina. Show some pics of the seats and interior.

Share this post


Link to post
Share on other sites

I would bite a bullet and end up with the exterior paint. Maybe in the spring, not now.

Overall a nice looking B.

Share this post


Link to post
Share on other sites

Cleaning up nicely!

  • Like 1

Share this post


Link to post
Share on other sites

I would leave like it is. You can always repaint it but never get it back to original. There are a number of ways to save the original patina . Eastwood sells a patina preserver some use the thick Thompson water sealer . 

Share this post


Link to post
Share on other sites
3 hours ago, eddeere said:

I would leave like it is. You can always repaint it but never get it back to original. There are a number of ways to save the original patina . Eastwood sells a patina preserver some use the thick Thompson water sealer . 

Only issue with any water sealer is they contain poly carbonate and silicone based additives, once it's on you will have an extremely bad time ever getting past future paint issues even blasting to bare metal..

  • Like 1

Share this post


Link to post
Share on other sites

You are correct the silicone would be a problem showing up as fish eyes on a repaint. I have never used the water sealer but have known some that have used it but have not repainted . A good wax and grease remover may help if done correctly .

Share this post


Link to post
Share on other sites
4 hours ago, eddeere said:

You are correct the silicone would be a problem showing up as fish eyes on a repaint. I have never used the water sealer but have known some that have used it but have not repainted . A good wax and grease remover may help if done correctly .ol'd

Any place where there is rust or bare metal it actually gets into the "pores" of the metal, I had a 37 Ford body someone put Thompson's Water Seal on It was Prep Sol'd ,sanded,  Metal Prepped ,sealed , primed and painted and had major issues. Had the body media blasted and prepped it and had less issues but still issues. Ended up taking in to Redi Strip and had it tanked and the paint issues were gone.

Share this post


Link to post
Share on other sites

Eddy Lucast over on Just Old Trucks has a KBS clear coat which will protect the present patina.

  • Like 1

Share this post


Link to post
Share on other sites
13 hours ago, Brocky said:

Eddy Lucast over on Just Old Trucks has a KBS clear coat which will protect the present patina.

Yes. it's part of the K2 system ,even comes as semi gloss and dead flat. Nice thing is it is paint.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...