quadB Posted February 17, 2018 Share Posted February 17, 2018 My jake only works at lower RPMs....when it reaches 1200 RPMs it stops working....Any ideas Quote Link to comment Share on other sites More sharing options...
0 j_martell Posted February 17, 2018 Share Posted February 17, 2018 ....maybe thats were the cut off is set. My "old" 2011 MP7 granite was 900RPM and the PowerLeash de-activated. the RD doesnt have an engine brake Quote Lack of planning on your part does not constitute an emergency on my part.... Link to comment Share on other sites More sharing options...
0 sllimec47 Posted December 29, 2018 Share Posted December 29, 2018 What engine do you have in your CL? Quote Link to comment Share on other sites More sharing options...
0 Natedog Posted September 23, 2019 Share Posted September 23, 2019 My e6-350 engine does the same thing, works well until I get to 1200 rpm, then stops working. Did you ever figure out why? Quote Link to comment Share on other sites More sharing options...
0 Swishy Posted September 23, 2019 Share Posted September 23, 2019 Could B 2 do with the fine adjustment of the micro switch @ the back of the fuel pump Slide the spade connected wire off the brass conection @ back of pump and turn the screw a 1/4 turn me 4 got which way then put it back together n try on road and compare only use engine brake when engine @ operating temp cya Quote Link to comment Share on other sites More sharing options...
Question
quadB
My jake only works at lower RPMs....when it reaches 1200 RPMs it stops working....Any ideas
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.