Jump to content

timing solonoid lose power


moy

Recommended Posts

Hi every one 

I Have a 96 RD losing power from the V-MACK computer to the timing solenoid wire no. 11-D-16 .Before connecting it to the timing solenoid reads 11.3 volts from the V_MACK Module. (battery voltage is 12.8) as soon as the time solenoid is connected the wire lose power, and all I can read out of it is the ground  resistance created by the solenoid coil. all wires to the ECM were check and there is solid 001 to 002 oms. power and ground connections are been check as well wires connecting BOSH ECM and V-MACK Module. I have a sister truck so, solenoid,time sensor, V-MACK ECM and BOSH ECM  as been swap. 

time is fine in low idle but as there is no power in time solenoid at hi idle the excessive  smoke and lose .power .

Any ideas ? thanks every one  

Edited by moy
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...