EN401 Exhaust Manifold

[Doug T B42X 7]

Looking for an Exhaust Manifold for an EN401 Engine.  1958 B42X.

[Maddog13407 2,087]

cracked on the middle part beneath the carb? common spot for them. most I have, and have seen have been welded.

[Doug T B42X 7]

That's the spot!  This one looked like it had been welded also.  I have not removed it yet, but the exhaust pipe flange is not connected.

[bulldogchaser 0]

I have one but its cracked in the same place. Could be repaired. Other than that its in awesome shape. if interested let me know.

 

[KKERGALL 9]

What is the P/N# on manifold you need I.E. 104GC??

[Doug T B42X 7]

Bulldogchaser - thank you; I should have an idea as soon as I get the old one off and will let you know, then see if you still have it available.

Kkergall - Yes, and I am assuming I will change the whole assembly.  104GC 439A (Rear) 104 GC 440A (Front) and 104 GC 4157 (Center).  That is, if it cannot be welded.  

[Doug T B42X 7]

Sorry for the delay in getting back to you.  According to the book I have (Parts List 2342; for B42IT, for EN401 Engine) it has the same part numbers.  If it cannot be welded, I would be looking for one also.  Thank you.  I just started the truck the other day and it ran fine, so the Exhaust Manifold is the only thing holding it back.

[Mack58B42 124]

Doug T - did you ever find an exhaust manifold?  Beatngu just posted that he's getting rid of a dead 401 in a truck he has - might have a good one for you on it..... 

[beatngu 102]

Indeed it does I just pulled the engine out today, first come first serve. 

[Doug T B42X 7]

No, I never did.  I would definitely be interested in that!