Jump to content
Sign in to follow this  
hurstscrambler

Spicer auxiliary rear seal

Recommended Posts

I'm swapping the Spicer 8341-c auxiliary transmission in my IH, and in the process I need to swap the rear driveshaft flange.  I figured I would replace the seal, but there doesn't appear to be one.  Is this possible?  I'm I missing something?  I included a picture of the back of the transmission with the speedo housing and flange removed, as well as pictures of the speedo housing and flange.  Thanks, Andy

IMG_20171121_212517.jpg

IMG_20171121_212659.jpg

IMG_20171121_212617.jpg

Share this post


Link to post
Share on other sites

http://partsmanuals.org/spicerpartsmanuals/Spicer-T210-R8341-Parts-Manual.pdf

 

  Look at bearing  caps and related parts. pages 6 & 7 show a seal, check numbers of unit against your to be sure. the C designation may be later

Edited by 41chevy

Share this post


Link to post
Share on other sites

I had looked at that manual, and it shows the front and rear as using the same seal.  I got the number off the front seal and ordered two from NAPA, then I took the rear apart and couldn't find it.  I guess that manual shows a later version with a traditional seal.   Unfortunately, I don't work on stuff like this very often, so I just wanted to make sure I wasn't missing something.   Thanks, Andy

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...