markpwhit 46 Posted May 2, 2017 Share Posted May 2, 2017 Need help to confirm. Need to replace fuel pump on a B model that is 12 volt positive ground. Existing pump is a new modern version that is about 10 years old. When wiring a replacement, does it need to be wired in reverse polarity - meaning the hot wire from the pump needs to be grounded and the ground wire from pump is wired to the hot off the truck. Thanks in advance. Quote Link to post Share on other sites
tjc transport 1,233 Posted May 2, 2017 Share Posted May 2, 2017 correct. positive lead of the pump goes to ground. 1 Quote when you are up to your armpits in alligators, it is hard to remember you only came in to drain the swamp.. Link to post Share on other sites
41chevy 10,259 Posted May 2, 2017 Share Posted May 2, 2017 Exactly, Also confirm the pump is pumping to the engine after you got it in. Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.