Granite 1969 PSC Posted February 16, 2017 Share Posted February 16, 2017 I have a 2013 Mack GU713. Just a little back ground, this truck is a hot oiler that has a secondary throttle control on the side of the truck so the operator can control the engine from the outside. The throttle control is tied into the cruise control so you can idle the truck higher or lower from the out side. Anyway the operator tried to replace the external throttle control on the outside and arced the power wire on the box in the process. After that happened the cruise control quit working completely. I have looked at both fuse box diagrams and cannot find a fuse or relay that says it is supposed to control the cruise control. Also I have tested all the fuses and haven't found a blow fuse. If anyone knows what relay controls the cruise control please let me know. Any and all help would be appreciated. Quote Link to comment Share on other sites More sharing options...
turckster Posted March 3, 2017 Share Posted March 3, 2017 Fuse 17 powers the cruise control switch. Its a 10 amp fuse located in the upper bussed electrical center. Quote Link to comment Share on other sites More sharing options...
Granite 1969 PSC Posted March 6, 2017 Author Share Posted March 6, 2017 Thanks for your help . Quote Link to comment Share on other sites More sharing options...
Cody mullenniex Posted September 9, 2019 Share Posted September 9, 2019 Thanks it actually was the correct fuse Quote Link to comment Share on other sites More sharing options...
Tracy Admond Posted June 5, 2020 Share Posted June 5, 2020 Were I'd the relays and fues for the cruse and jake in a 2013 mack Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.