Jump to content

Easy pedal clutch for MP8


1965

Recommended Posts

All I could find on eaton website was a easy pedal for Mack with only 1760lb of torque rating; MP8 has 1860lbs. Part#208925-92

everything I've heard & read says you need torque rating above engine rate

any help here would be greatly appreciated 

thanks

Link to comment
Share on other sites

If your MP8 is rated at 1860 ft-lbs you'll need a VCT+ clutch rated at 1860 or higher.  The Mack 9-spring will be getting a rating increase in April of 2017 to match the 1860 ft-lb engine rating but Eaton will not warranty the current 9-spring at 1860.

your correct about the springs in the disc dampening the chatter and shock from the crankshaft.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...