Jump to content
Sign in to follow this  
c-mac

08 MP7 camshaft markings

Recommended Posts

Just finished replacing cups and injectors in an 08 MP7. Now about to run the overhead.  Its is stamped different than the MP8's I have done. an 8 would have 3 E 4, #3 intake and injector, # 4 exhaust. This 7 says 3 V 4. is this the same? Also do you line it up by the the first number that  appears to have a line through it or the line after the last number?  3 V 4 l example. couldnt make a line through the 3. Oh and one other thing, Is the adjustment for the injector, screw center bolt down until contact then tighten 4 flats and tighten jam nut, Iike an MP8?

Edited by c-mac

Share this post


Link to post
Share on other sites

Adjust the intake valves and injectors on camshaft markings 1-6.

Adjust exhaust valves on camshaft markings with a "v" before the number.

Injectors are adjusted zero lash plus 4 flats.

Share this post


Link to post
Share on other sites

Thanks man! You saved my butt.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...