Jump to content

Recommended Posts

small steady stream of oil comming out of blowby tube when running under load. when trk is running at fast idle in neut. it does not do it. in spected turbo and saw where impeller was rubbing on housing and thought it was pressurizing the crankcase by  blowing by seals into oil return line. replaced turbo which was bad. after trk reached opp. temp and driving under load it still does it. any ideas would be great tks

Share this post


Link to post
Share on other sites

I know this is old, but check your air compressor. Remove intake pipe from compressor and blow shop air in it with engine oil dipstick removed. See if you are getting air into crankcase. I've seen more than a few compressors with a busted piston do this.

ETA....Didn't notice this is an mp engine. Might not apply in your case if the compressor intake is plumbed  into air cleaner pipe, and not boosted air.

Edited by steeler

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...