Jump to content

Recommended Posts

Hey guys I'm installing external air cleaners on a superliner I'm redoing, need some under hood pics of the left side to see how the piping clears the clutch cable, mine has no room for the pipe without moving the cable, I will post some pics tomorrow to show the problem, was thinking there might be a different cable bracket for a factory external truck

Share this post


Link to post
Share on other sites

if no one here can get you any pics let me know later in the week..A friend has a factory dual air cleaner Superliner near me and I could get some pics for you.

Share this post


Link to post
Share on other sites

Hey guys I'm installing external air cleaners on a superliner I'm redoing, need some under hood pics of the left side to see how the piping clears the clutch cable, mine has no room for the pipe without moving the cable, I will post some pics tomorrow to show the problem, was thinking there might be a different cable bracket for a factory external truck

Go to "Waking up the E9" post you can see how it was done on my Superliner. I don't think any brackets were moved or made. They sure help it breathe!!

  • Like 1

Share this post


Link to post
Share on other sites

I can see pretty good in your pics, looks like my clutch cable comes off the cab on a downward angle, and yours goes straight out, theres a small piece of metal on the cab where the 2 jam nuts are on the cable, I think if I losen them I can flip that metal piece around, then it would raise the cable up, maybe someone put mine on wrong in a cable replacement, I will try it today, thanks for the info

Share this post


Link to post
Share on other sites

My friend has a crash book on a Superliner with factory dual breathers. If need be I can snap some pics and post them here or I can get your number and txt them to ya if you like. It tells you every nut and bolt and Mack part numbers.

  • Like 1

Share this post


Link to post
Share on other sites

Mack Dr that would be great whatever you can send me, my cell is 914-474-7383

Share this post


Link to post
Share on other sites

Any pics Bach in black, my crossover would have to go on top of the cable with a notch on the bottom

Share this post


Link to post
Share on other sites
1 hour ago, Back In Black Pulling said:

Yep all mack pieces

seen guys make there own aluminum crossovers

 

 

Like on my truck. Think it was actually made out of aluminum at Madison Mack on my truck. it is 6 inch. I think Back in Black's is 7" into 6 at the turbo and mounted higher.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...