mackr400 7 Posted February 11, 2016 Share Posted February 11, 2016 Hi looking at a single axle u model dump the truck is in pretty decent shape except the cab is really rusty i was wondering if the where any clean cabs out there or would a dm cab be the same. Im sure the exact year yet but it dose have the tan plastic dash and a 237 and 5 speed in it. thanks for the help Phil Quote Link to post Share on other sites
alex g 711 Posted February 11, 2016 Share Posted February 11, 2016 I have a really good DM cab here if interested pm meSent from my SM-G386W using Tapatalk Quote Link to post Share on other sites
terry 529 Posted February 12, 2016 Share Posted February 12, 2016 I put a U model cab on a DM, It was a unbolt and bolt in installation. It was a mid 80's cab on a 1970 frame. terry Quote Link to post Share on other sites
mackr400 7 Posted February 12, 2016 Author Share Posted February 12, 2016 Thanks for the info this is a 1980 and has the flat back cab on it. Quote Link to post Share on other sites
mackr400 7 Posted February 12, 2016 Author Share Posted February 12, 2016 Quote Link to post Share on other sites
kscarbel2 4,734 Posted February 12, 2016 Share Posted February 12, 2016 Thanks for the info this is a 1980 and has the flat back cab on it. Sounds like your cab is a Mack type CA363.CA36 (pre 1973 R-model)CA361 (pre 1973 U-DM)CA363 (post 73-81 U-model)CA49 (post 73 R/RD/RS/RL - fiberglass and steel hood)CA491 (post 73 DM - fiberglass hood / 81' on U-model)CA492 (post 73 DM - steel hood)CA494 (RWI600/700 Super-Liner) Quote Link to post Share on other sites
alex g 711 Posted February 12, 2016 Share Posted February 12, 2016 That trucks a lil sweetheart Sent from my SM-G386W using Tapatalk Quote Link to post Share on other sites
Vladislav 2,993 Posted February 12, 2016 Share Posted February 12, 2016 Thanks for the info this is a 1980 and has the flat back cab on it. What is a flat back cab?All of what I've seen had two horizontal "dents" from left to right. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to post Share on other sites
mackr400 7 Posted February 12, 2016 Author Share Posted February 12, 2016 I think it means it has the smaller depth cab like the early r's most of them had the steel dash unlike the newer r's there deeper or bubble out. I could be wrong but that is what I gathered so far Quote Link to post Share on other sites
j hancock 13,667 Posted February 12, 2016 Share Posted February 12, 2016 You are right. Early "flat" back versus the +3 later cab. Quote JimIt doesn't cost anything to pay attention. Link to post Share on other sites
mackr400 7 Posted February 12, 2016 Author Share Posted February 12, 2016 Thanks I will post more pics when I get it home. It was originally a road tractor for penske is what the steering wheel says Quote Link to post Share on other sites
Vladislav 2,993 Posted February 13, 2016 Share Posted February 13, 2016 I think it means it has the smaller depth cab like the early r's most of them had the steel dash unlike the newer r's there deeper or bubble out. I could be wrong but that is what I gathered so far Thank you for the answer.It's just a usual thing when you used to think you knew everything on a subject and at some point something almost new shows up. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.