Jump to content
eddeere

B61 front brake chambers

Recommended Posts

Bought 2 new T 12 chambers today. The left side chamber hits the arm out of the steering knuckle. Anyone know of the part # of one that will fit, or a safe fix.

post-9172-0-50402800-1453851066_thumb.jp

post-9172-0-45589200-1453851087_thumb.jp

Share this post


Link to post
Share on other sites

I put a 12000# axle under my B61 and the smaller chambers fit, but don't know the part#s I looked at mine and the holes are up-down yours are sideways. my new chambers look like the ones you took off. the only problem I had was on the auto slack adjuster was tight on the driver side.

Share this post


Link to post
Share on other sites

If you cant find the smaller diameter ones do like what carlotpilot said, just clean it up replace the pancake for about $2 and you should be good.

Take the old one with they should be able to cross it if they know what they are doing

I found this looks like yours but I would have them measure it

SC09 by HALDEX
Service Chamber - Size T09

http://www.finditparts.com/products/370839/haldex-sc09?srcid=CHL01SCL010-Npla-Dmdt-Gusa-Svbr-Mmuu-K370839&gclid=CjwKEAiA8qG1BRDz0tmK0pufw3QSJACfn6olNNIdb7sA40EQ7qOYipO7F2C_4s50yRiQh5GhhfK-lhoC0X7w_wcB

Share this post


Link to post
Share on other sites

Thanks. I started with carlotpilot's idea. When I got the old ones apart the springs were broken. The new ones were too short. With the link from thomastractorvc I orded 2 Haldex SC 12 chambers. They will come from California and are temporary out of stock. If any one needs a type 12 as pictured let me know. Priced very reasonable.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...