Jump to content

Recommended Posts

Hi,

I hope I can get some urgent input from those in the know.

I have someone fitting a sleeper to my R Model in the next few days. The R cab is on air but the sleeper will be fixed to the chassis and connected to the cab with a rubber sock. All brackets have been made and are ready for mounting but I just want to be sure we are doing the right thing with respect to the fixed sleeper height.

If the cab is propped into its operating position as if full of air (ie. level), should the cab and sleeper openings line up or should the sleeper sit slightly lower than the cab? If so, by how much?

My installer was thinking that the sleeper should sit about 15-20mm lower than the relative operating position of the cab so the sock is not over-stretched when the cab is in its resting position.

Anyone have an opinion on this?

Thanks

Share this post


Link to post
Share on other sites

I have serious doubts about that set up working for very long due to the sideways as well as the up and down movement of the cab might work ok on a hobby truck for a while but an in service unit i believe would make short work of the boot and leak

Share this post


Link to post
Share on other sites

openings should line up,. Able Body used to offer an accordian type boot that allowed for extra movement of the cab,but they are out of business and I don't know where you could find one unless it would be from a dealer that installed pickup toppers/campers.

Share this post


Link to post
Share on other sites

when using the standard rubber boot,you need to allow for slack by using extra material and not stretching it tight,but it will still eventually wear out. The one on my Dad's old Superliner lasted about 10 years.

Share this post


Link to post
Share on other sites

openings should line up,. Able Body used to offer an accordian type boot that allowed for extra movement of the cab,but they are out of business and I don't know where you could find one unless it would be from a dealer that installed pickup toppers/campers.

Thanks Superdog - much appreciated. The rubber I am using is an accordian style - I was told by many that it is the best material for the job that is available in Australia (noting that there really isn't much available in Australia). If it lasts 5 years I will be happy. If we still have the truck then, I will put the sleeper on rails. Was originally planning to do it as part of this rebuild but just don't have the time. Cheers

Share this post


Link to post
Share on other sites

hope it works out ok please send us some pics when its done and let us know how good or bad it works might try something like that my self

  • Like 1

Share this post


Link to post
Share on other sites

I have serious doubts about that set up working for very long due to the sideways as well as the up and down movement of the cab might work ok on a hobby truck for a while but an in service unit i believe would make short work of the boot and leak

Hi mate, I tend to agree that it is not the best method by design but it is commonly used and I have bought very high end boot material that is used on new trucks over here. It's just a local on road truck so I am not expecting too much strain in any event. If I have trouble, I may put it on rails down the track.

Share this post


Link to post
Share on other sites

hope it works out ok please send us some pics when its done and let us know how good or bad it works might try something like that my self

Will do, all going well, it will be all together within a week or so.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...