Jump to content
Sign in to follow this  

RD688S Relay problem

Recommended Posts

I have a 2001 rd688s that shuts off going down the road. I have traced it to what I think is a relay getting hot. There are 2 relays in the glove compartment that get to around 150 or 160 and then one clicks and the truck shuts off. It is not the ignition relay that clicks. I have cleaned the starter to frame and frame to the block grounds and ran a new one also. I replaced the relays also. Any ideas would be great. After working on it some more I am not sure it is the relay shutting it of because the power and ground do not change after it shuts off only after the motor quits turning over.

Edited by ultratruck

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...