rsb502 Posted October 25, 2013 Share Posted October 25, 2013 I have fixed two backhoes twice this week, then I got to try to get a burro crane running, needs a battery again, then I got to do my monthly paperwork from last month and my credit card paperwork. Now that all that's done I think I might throw some hot rod injectors in the ol E9 this weekend, fresh from the diesel shop all nice and clean and with new seals and a good pop test(popping bout 300-400psi higher than spec) they flow about 30% more than the stock E9 450 injectors and the higher injection pressure should help it purty good too. 1 Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
other dog Posted October 25, 2013 Share Posted October 25, 2013 I work on trucks in a bikini all the time, whats so big a bout a tied up shirt? lolme too, but I don't show any side boobage. 1 Quote Producer of poorly photo-chopped pictures since 1999. Link to comment Share on other sites More sharing options...
rsb502 Posted October 25, 2013 Share Posted October 25, 2013 me too, but I don't show any side boobageHa, that can be good or bad depending on your perspective! Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
other dog Posted October 25, 2013 Share Posted October 25, 2013 Ha, that can be good or bad depending on your perspective!this is an example of "good". Quote Producer of poorly photo-chopped pictures since 1999. Link to comment Share on other sites More sharing options...
Timothy Maikshilo Posted October 25, 2013 Share Posted October 25, 2013 Oh so lucky with a beautiful view like that! I am jealous!!And I feel like going home lol!! That will suffice for me!The Presidential mountain range is beautiful for sure and enjoyed every minute of working there! Quote Link to comment Share on other sites More sharing options...
j hancock Posted October 26, 2013 Share Posted October 26, 2013 So earlier this week this was the dealThen yesterdayFine looking axle upgrade. Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
Mike Posted October 26, 2013 Share Posted October 26, 2013 me too, but I don't show any side boobage. I would guess yours go up and out like bullits. I have to hold mine in so they don't get in the way of working on the Mack. It hurts like %#&* when i'm using a snap on. They tend to pinch an inch. mike Quote Link to comment Share on other sites More sharing options...
hatcity Posted October 26, 2013 Share Posted October 26, 2013 Well ECD, I don't have the luxury of being able to take selfies while working. I have to watch bucket, boom, traffic, wires all at the same time.BUT, this is my SaturdayOil, filters, air filter,.....Then it was Part IIfull chassis grease and inspectionPart III was rotating the steersPart IV was a full washPS, no selfies anyway. OD would just butcher them 2 Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment Share on other sites More sharing options...
Popular Post other dog Posted October 26, 2013 Popular Post Share Posted October 26, 2013 ...and now, what really happened-today,2:08 pm-hatcity finds some empty boxes in a dumpster somewhere.2:09 pm-hatcity comes up with a plan.2:10 pm-hatcity places boxes on the ground by the right front tire, lifts boom, raises body slightly, takes pictures. Puts empty boxes back in the dumpster, lowers body, lowers the boom.2:18 pm, races inside to post pictures and calls it a day.p.s.- see, I can butcher more than just pictures. 7 Quote Producer of poorly photo-chopped pictures since 1999. Link to comment Share on other sites More sharing options...
hatcity Posted October 26, 2013 Share Posted October 26, 2013 Jeez-not just butcher pitchers, he kills a story too! 1 Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment Share on other sites More sharing options...
Mike Posted October 26, 2013 Share Posted October 26, 2013 LOL....it is good that I don't photo chop.mike Quote Link to comment Share on other sites More sharing options...
Eastcoastdiesel Posted October 26, 2013 Author Share Posted October 26, 2013 I'm having the hardest time with a my Mack's and a 4-5 vgt voltage code. Making me mad!! Quote Link to comment Share on other sites More sharing options...
1958 F.W.D. Posted October 27, 2013 Share Posted October 27, 2013 I'm having the hardest time with a my Mack's and a 4-5 vgt voltage code. Making me mad!!Check the Fetzer Valve Quote TWO STROKES ARE FOR GARDEN TOOLS Link to comment Share on other sites More sharing options...
j hancock Posted October 27, 2013 Share Posted October 27, 2013 Check the Fetzer Valve30 weight motor oil and ball bearings.... Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
Eastcoastdiesel Posted October 27, 2013 Author Share Posted October 27, 2013 Hey guys I know it's not the muffler bearings, :/ it's sucks. Oh well I'll replace the actuator tomorrow. I am pooped!! I hope y'all had good days.Ps I want a boom truck. Quote Link to comment Share on other sites More sharing options...
slpwlker Posted October 27, 2013 Share Posted October 27, 2013 Fine looking axle upgrade.It has some issues. Had it down for some trial runs and hit a bump and damn thing shook like crazy. Luckily I don't need it on this run. Gonna replace the stabilizer shocks asap Quote Link to comment Share on other sites More sharing options...
NoClueJoe66 Posted October 27, 2013 Share Posted October 27, 2013 30 weight motor oil and ball bearings.... Thats what Irwin Fletcher would do Quote This message was brought to you by Hargraves Potted Meat Product. Chopped full of "Peckers & Lips" since 1933 - John Boy & Billy Link to comment Share on other sites More sharing options...
staxx Posted October 27, 2013 Share Posted October 27, 2013 Need to replace the pins in the connection at the vgt . This usually fixs 90% of the vgt 45 code issues. Quote Link to comment Share on other sites More sharing options...
j hancock Posted October 27, 2013 Share Posted October 27, 2013 It has some issues. Had it down for some trial runs and hit a bump and damn thing shook like crazy. Luckily I don't need it on this run. Gonna replace the stabilizer shocks asapYup, shock may be blown.Never really looked at a steer lift. Does it need an alignment like a regular front axle? It may need a couple of shims to give it more caster angle. Probably could get king pin inclination angle info from the manufacturer. Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
Eastcoastdiesel Posted October 27, 2013 Author Share Posted October 27, 2013 Thank you staxx! Quote Link to comment Share on other sites More sharing options...
RFCDrum Posted October 27, 2013 Share Posted October 27, 2013 This is what I did today. Picked up a Bruns weeping Serbian Spruce for tomorrow for a client in Ridgewwod, NJ. That's the nursery manager giving it some scale. He is about 6'-6''. Need to get this job done so I can get paid. Rob 1 Quote Link to comment Share on other sites More sharing options...
RFCDrum Posted October 27, 2013 Share Posted October 27, 2013 Did it again forgot pic. 1 Quote Link to comment Share on other sites More sharing options...
Eastcoastdiesel Posted October 27, 2013 Author Share Posted October 27, 2013 That's a neat looking tree. Get it done Quote Link to comment Share on other sites More sharing options...
RFCDrum Posted October 27, 2013 Share Posted October 27, 2013 Well that is the key plant as the client wouldn't let us lay out the rest of the planting till we located this to hide a light on the neighbor's back door. Shades would be cheaper. Wait till she finds out how much this plant is. Quote Link to comment Share on other sites More sharing options...
Eastcoastdiesel Posted October 27, 2013 Author Share Posted October 27, 2013 Ok I just got to work, are these the pins your talkin about staxx? I feel pretty new when it comes to this variable crap Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.