Jump to content

Recommended Posts

SUPRISE!!!! The cabs on! Yayyyyyyy!! Im so happy. Well, first we tryed to put it on like we took the other one off. FAILED. So we used the board and blanket thing. That worked. So when we got the cab close to the motor, I had to follow it, while pushing the passenger side with a broom, so that the part where the air cleaner goes, wouldnt hit the motor. More pictures next post.

  • Like 2

tumblr_l9s7ezxJxI1qcke4q.jpg

Link to post
Share on other sites

A paradise under construction!

You are happy guy Vinny!

It's very good you have most painting during the sommer done.

Vlad

  • Like 1

Никогда не бывает слишком много грузовиков! leversole 11.2012

Link to post
Share on other sites

Groan......Vicenzo......That crap only works on flat surfaces, too many "nooks and crannies" in hubs, you need to take them things off and sandblast em if you want it done right!!!! Also that stripper is damn near impossible to fully remove without lighting up a good hot steam pressure washer. It would be a waste to do all that hard work and then apply the paint only to have it flake off.....

  • Like 1

TWO STROKES ARE FOR GARDEN TOOLS

Link to post
Share on other sites

Groan......Vicenzo......That crap only works on flat surfaces, too many "nooks and crannies" in hubs, you need to take them things off and sandblast em if you want it done right!!!! Also that stripper is damn near impossible to fully remove without lighting up a good hot steam pressure washer. It would be a waste to do all that hard work and then apply the paint only to have it flake off.....

We'll see about that Yardo.....

tumblr_l9s7ezxJxI1qcke4q.jpg

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...