LITrucker Posted February 11, 2007 Share Posted February 11, 2007 Hey guys,I finally got the spin-on filter assm. on my old 673(McOz you were right about changing the water pump housing I also had to use the pump that came with it to line up the fan belts,and the gasket # you gave me was right on,thanks) when I fired it up the oil pressure went to the max, at dead idle it was keeping a steady 95psi. The only reason I can come up with is that the unit came off a turbo engine and I removed and plugged the oil line so there is no release. I'm not sure how to solve this. Do I try and find a different relief set-up for the new housing or should I run a line from the turo port to the 1/4 drain back hole? Would that be enough? Any help on this would be greatly appreciated. Thanks. Bill Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.