Jump to content
Sign in to follow this  
chris88

End 711?

Recommended Posts

How are these engines? I dont see much on them. Are they reliable? How about power? The truck im buying has the 711 in it and i was just wonderin how they are. It was rebuilt before it was parked so it should be tight. Is there anything i should do before i fire it up? Its been settin about 8 years since its been started.

Share this post


Link to post
Share on other sites

END711 211 hp 602 lbs torque about the same specs as a early DT466 in the Internationals. Looks like the 711 is using cubic inch for power rather then a turbo like the DT. What year and model is it in? I would drain the fuel, change the fuel filter, drain and change the oil. Crank it over with the fuel shut off to pump oil through the engine. Look for mouse nests in any intake,exhaust.

Share this post


Link to post
Share on other sites

alot of 711's had head gasket trouble,I've ran 2,and they both gave no problems.I think alot of it depended on how much fuel you were pouring to them.

Share this post


Link to post
Share on other sites

Its in a 64 B 61. I dont plan on working it hard or messin with the pump at all. Just a play truck to pull a trailer everynow and then. They typically run pretty good and start good though? I just want to know as much about the engine before i get it so nothing phases me.

Thanks

Chris

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...