Jump to content
Sign in to follow this  
56mercuryman

Mack Gas Engine Govenor And Oil Cooler

Recommended Posts

I have a 65 mack B42 dump that came with a EN402 with a oil cooler unit on the block and a carb govenor. I have another 59 mack B42 tractor that came with a EN401 with a carb govenor but no oil cooler. I am replacing the engine in the 65 dump with another engine I aquired and was out of a water truck. It is a EN401 and has no factory governor, or oil cooler. Question is, how important is it to put the governor and oil cooler back on the engine I am replacing in the dump truck?

I don't plan on working it hard and just using it now and again, it also does not get overly hot in this climate. I did some checking and it appears the oil cooler was an option on these engines for certain applications, however not sure why all the engines did not come with a govenor.

I am not overly familiar with these old gas engines, I don't want to blow it up for lack of knowledge. Any input?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...