Jump to content

Recommended Posts

Does anyone if there is a manufacturer or a vendor that sells

the original type stainless steel hood hinge in lengths for the various

B model hood panels? I could sure use a couple of new, or really straight

original pieces.

Thanks,

Paul Van Scott

Share this post


Link to post
Share on other sites

Can you still get the hinge for a DM 800 from Mack. That is what I used on my B, back in '91

FW

Share this post


Link to post
Share on other sites

Does anyone if there is a manufacturer or a vendor that sells

the original type stainless steel hood hinge in lengths for the various

B model hood panels? I could sure use a couple of new, or really straight

original pieces.

Thanks,

Paul Van Scott

Watts Mack has them in the B-Model store

Share this post


Link to post
Share on other sites

If I remember right, the "B Model Store" has them.

Packer

And yes,If the king pins are tight, we can work a deal.

Need a 60 gallon 'R' Model alum tank also.

Got the straps, etc. just need the tank!

Share this post


Link to post
Share on other sites

Our stainless hinge is long so it will fit all models. In most cases, it will need cut down a bit to fit your application.

Share this post


Link to post
Share on other sites

I know this post is 2 years old but i just checked in the B mack store and couldn't find a hinge that I need for the center hood hinge on my 1947 Mack EH I know The B Mack Store had them before, are they out of production now? Hope not mine's in pretty rough shape anyone got any suggestion as to where i can find new prefered or good used

  • Like 1

Share this post


Link to post
Share on other sites

Leaford,

There's a guy in Homer City, Pa. that has them and the end caps as well, not cheap $300.00 for new or $125.00 for good used.

His name is C.D. Roser ph.(724)840-3800----website is www.kingofsalvage.com

Ron

Share this post


Link to post
Share on other sites

I have learned that the hinge itself is not unique to Mack, rather it was used on many manufacturers hood panels, including automobiles and pick-up trucks.

Someone here will know more about this than I do, but the hinge was a standard molding in the automotive industry.

Earlier someone did suggest that the DM hard-nose hood hinge might work, and I think it would. And Mack should have it available. The price should a little more reasonable if that is true.

  • Like 1

Share this post


Link to post
Share on other sites

The original part number for the hinge is 4QM12P23. It is NLA from Mack. It indeed was the same part on everything that used butterfly hoods from ED 1 ton trucks to the DM800.

So, A's, B's, E's, L's, R's and DM need them. Just cut to length.

I have found a Ford part 40-16632 from Mac's Ford parts that worked ok on an ED. It is 34 inches long. The shape is "off" a little tiny bit but so far the function and general look is ok.

This hinge is not really the structure of the hood so I am going to experiment with welding two together to make a longer one for a B75. Its functions is to keep the two hood halves together.

I haven't tried but have even thought of just taking two that make up the right length and just butt the two pcs between the end caps and it will be captured. Unless someone is really looking for the "gap" it will be pretty tough to spot.

I hope Mack will tell Barry the maker at some point so another batch could be run. The part has been gone for about a year. The rolling tool for this part I doubt has been junked. We just need to find the company and get some raw stock flowing.

Sheller Globe which made many cabs for Mack was in the Midwest so there is a shop somewhere out there that has it.

After we get hood strips figured out, lets work on vent windows!

Jim

Share this post


Link to post
Share on other sites

Ford "F" series trucks of the 40's through mid 50's use the same type strip and they are readily available through aftermarket suppliers albiet expensive. I'm thinking "Restoration Specialties" also had them. I'd ask you try them first as they are a small operation that really supports the antique hobby with what I consider very fair pricing.

Rob

Share this post


Link to post
Share on other sites

Dear All BigMackTrucks Expertise,

Re : INQUIRY

Can someone please help us find and quote ( original or replacement or equal ) the following parts for Mack Truck model R685 (Year 1972) :

1 ea of Lens & Rim Assy ; Part No. 36MO219P8

4 ea of Hinge, Hood ; Part No. 4QM12P23 or 4QM12P5


How much do they cost includes the cost of shipping to U3-32 Balikpapan Baru, Distric Amsterdam, Balikpapan city 76125, Indonesia.
Paying with Paypal or bank wire transfer.


Please use rajalampu@telkom.net for quote.

Your help and prompt reply would be much appreciated and thanks.

Yours sincerely,

Linda Juliana

Procurement Officer

Raja Lampu Co. Ltd.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...