Jump to content

Freshening Up A 237?


BobH

Recommended Posts

I just picked up a "new" 237 to replace the ailing one in my B61. I got the engine from someone I trust and it supposedly has low hour and runs good. I know it came out of a wrecker so that makes sense. The motor has been sitting in the truck for at least 10 years with no more running that to move it around the yard. I have some tine before I have to drop it into my truck so I was wondering what you all thought should be done while it's on the stand and easy to get to. I don't think I need to pull the heads or crank but was thinking about changing all the other gaskets. What about changing the oil pump while the pan is off? Any other problem spots or better check areas while it's out? Bob H

Link to comment
Share on other sites

well old 237 doesn't leak that much. nice engine good for years of abuse.. lots of them have been sitting in the yard for so long and somebody else take it home and work with it without any problem... if it was mine i would not change anything if anything seems wrong... if you're doing a frame off on your b-61 it's another thing..

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...